This kit is a great solution to keep the top half of your BMW N42 or N46 oil leak free!
Keeping oil inside your car's engine is extremely important for proper lubrication and performance. After years of heating up, cooling down and exposure to oil the structure of the gaskets can break down, fail, and begin to leak. The rocker cover (also known as the valve cover or tappet cover) has an important role of protecting the camshaft, valve lifters and other components in the cylinder head.
The spark plug tube O-rings also known as the spark plug pipe O-rings, are the seals that stops oil leaking into the area where the spark plugs, and ignition coils are situated. The ignition coil goes through the tube from the top of the rocker cover. Recommended to be checked for damage whenever replacing spark plugs, ignition coils, rock covers or rocker cover gaskets.
The VANOS solenoids are located on the front of the engine and can be a common location for oil to leak. Replacing yours will eliminate the risk of engine oil loss.
Located on the passenger side at the rear of the cylinder, the cover plate includes 2 gasket rings to make sure there is a proper seal and keep engine oil in. Overtime high engine bay temperatures can cause the gaskets to fail, the cover plate can begin to crack and result in an unwanted oil leak.
The two oil filter housing gaskets seal the engine oil cooler to the oil filter housing and the oil filter housing to the engine block. They are quite common to fail and leak resulting in an annoying oil leak. Keeping oil inside your engine is extremely important for proper lubrication and performance.
Specifications
Gasket Material |
ACM (Polyacrylate) |
Flange Mounting Holes |
2 |
Flange Includes |
Seal ring |
Tube Small O-ring Size |
25.3x2.4 |
Tube Large O-ring Size |
30.2x3.0 |
Solenoid Small O-ring Size |
21.29x1.78 |
Solenoid Large O-ring Size |
34x3.52 |
Plate Housing Material |
Plastic |
Plate Seal Material |
FPM (Fluoride Rubber) |
Housing Fitting Position 1 |
Left, oil filter housing to engine block |
Housing Fitting Position 2 |
Left, engine oil cooler to oil filter housing |
This Kit Includes
Part Number |
Description |
Qty |
11120032224 |
Rocker Cover Gasket Set |
1 |
11377502022 |
Eccentric Shaft Sensor Seal |
1 |
11377514007 |
Spark Plug Tube O-Ring Large |
4 |
11377514008 |
Spark Plug Tube O-Ring Small |
4 |
11367506178 |
VANOS Solenoid Valve O-Ring Large |
2 |
11367546379 |
VANOS Solenoid Valve O-Ring Small |
2 |
11537583666 |
BMW Camshaft Cover Plate |
1 |
11427508970 |
Oil Filter Housing Gasket Cooler Side |
1 |
11427508971 |
Oil Filter Housing Gasket Block Side |
1 |
Part Numbers
BMW OE Numbers |
11120032224, 11120028033, 11377502022, 11377514007, 11377514008, 31421450532, 11367506178, 11367546379, 11360394126, 11360149818, 11377514007, 11377514008, 31421450532, 11427508970, 11427508971, 11537583666, 11534561884, 11537505411, 11537505657 |
Additional Information
Brand |
Aftermarket |
Quality |
Aftermarket Manufactured to match original product specifications. Quality inspected by staff at Only Euro.
|
Origin |
China |
Fitment
BMW 1 Series E87 (2004-2011) 2.0L 95kW | 118i |
BMW 1 Series E87 (2004-2011) 2.0L 110kW | 120i ! Fitment Restriction: Code: 120i
|
BMW 3 Series E46 (1997-2006) 1.8L 85kW | 316ti |
BMW 3 Series E46 (1997-2006) 2.0L 105kW | 318ti |
BMW 3 Series E46 (1997-2006) 2.0L 110kW | 318Ci ! Fitment Restriction: Code: 318CiN46
|
BMW 3 Series E46 (1997-2006) 2.0L 105kW | 318Ci |
BMW 3 Series E46 (1997-2006) 2.0L 105kW | 318i ! Fitment Restriction: Code: 318iN46, Code: 318iN42
|
BMW 3 Series E90 (2004-2011) 2.0L 95kW | 318i |
BMW 3 Series E90 (2004-2011) 2.0L 110kW | 320i ! Fitment Restriction: Code: 320iN46
|
BMW 3 Series E91 (2004-2012) 2.0L 110kW | 320i ! Fitment Restriction: Code: 320iN46
|
BMW X3 E83 (2004-2011) 2.0L 110kW | i ! Fitment Restriction: Model year to: until 01.2007
|